Not everyone is aware that they can control Yamaha receivers with a web browser. Notwithstanding, fifty-fifty fewer people know that there are Ii spider web interfaces on higher-finish Yamaha receivers, with one geared towards installers.

Pre-Configuration

Firstly, your receiver needs to be continued to your router – either through Wifi or through an ethernet cable.

Secondly, your laptop / PC / Mac / Phone and your receiver need to exist on the same Wifi network / connecting to the aforementioned router.

To get the IP accost for your receiver, yous have three options:

  1. You tin look under Network Setup in the menu on the receiver.
  2. Download the Yamaha iPhone App called Yamaha AV Controller which will prove the IP address for your receiver as it connects to information technology.
  3. Another selection is to cheque in your router's interface which IP the receiver has been allocated.

Standard Web Interface

The standard web interface is accessed using the IP address of the receiver as below (substitute IP address of grade):

http://IP-Address/

This interface is pretty minimal and looks like the below screenshot. I would recommend using the iPhone App called Yamaha AV Controller which has the functions and more.

Installer Web Interface

What is a lot more useful though is the installer web interface which is accessed by appending setup/ to the finish of the web address like and so:

http://IP-Accost/setup/

OR

http://IP-Accost/setup/alphabetize.html

This interface exposes all the functions of the receiver and does so in a more than logical and hierarchical style than the card system. In fact, there are some options that are easier to configure and access from here than the menus – PEQ filters existence one of them.

If y'all are serious about setting upwardly your Yamaha, I would recommend you get familiar with this interface – if your unit has it.

Which Models are Proven to Work?

All Aventage – and equivalent RX-5 models should work with both interfaces.

RX-A1000, RX-2000, RX-3000, RX-A1010, RX-2010, RX-3010, RX-A1020, RX-2020, RX-3020, RX-A1030, RX-2030, RX-3030, RX-A1040, RX-2040, RX-3040, RX-A1050, RX-2050, RX-3050, RX-A1060, RX-2060, RX-3060, RX-A1070, RX-2070, RX-3070, RX-A1080, RX-2080, RX-3080 and their RX-V10XX, RX-V20XX, RX-V30XX equivalents.

Both interfaces should work with the newer RX-A2A, RX-A4A, RX-A6A, RX-A8A and their older RX-V4A, RX-V6A, RX-V8A siblings, only the interface might await different.

YPAO – The Lost Transmission

Configuring YPAO – The Right Way

Yamaha YPAO Volume

Yamaha YPAO and YPAO R.S.C.

Recreating the Movie theater Feel: Yamaha'due south Cinema DSP